Welcome shopping with KUNWU!

ER316L Stainless Steel Welding Rods 3/32" Length 36" (1 Lbs)

More Views

ER316L Stainless Steel Welding Rods 3/32" Length 36" (1 Lbs)
$25.99

Availability: In stock


  • Primarily used for welding low-carbon molybdenum-bearing austenitic alloys. Common applications include equipment that manufacturers rayon, dye, paper, ink, rubber, bleach, photographic chemicals and on the sealing faces of valves and fittings for acid, gas, water and steam equipment.

  • Welding Positions: All Positions.

Description

Details

ER316L. This classification is the same as ER316, except for the carbon content. Low carbon (0.03 percent maximum) in this filler metal reduces the possibility of intergranular chromium carbide precipitation and thereby increases the resistance to intergranular corrosion without the use of stabilizers such as niobium or titanium. This filler metal is primarily used for welding low-carbon molybdenum-bearing austenitic alloys. This low-carbon alloy, however, is not as strong at elevated temperature as the niobium-stabilized alloys or Type ER316H.

Low carbon (0.03 % maximum) in this filler metal reduces the possibility of intergranular chromium carbide precipitation and thereby increases the resistance to intergranular corrosion without the use of stabilizers such as niobium or titanium.

The 2.5 % molybdenum content of 316L gives the weld deposit excellent corrosion resistance at elevated temperatures against “pitting” that may be caused by sulfuric, phosphoric and acetic acids.

ER316L is usually used to 18% chromium – 12% nickel – 2.5% molybdenum austenitic stainless steels such as 316 and 317 but with a low ferrite, it can also be used for welding 304/304L to 316/316L stainless steels in cryogenic service at temperatures down to -452 ℉ (-269 ℃).

Reviews

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.